TE-6P-MD 1&3 Ph Magnetic Drive Pump

March Pump’s industrial TE-6P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (21PSI).

Category:
Unit 60Hz
System US Metric
Max Flow 38 GPM 144 LPM
Max Head 49 FT 15 M
Power 0.5 HP 0.372 KW
50Hz
US Metric
30 GPM 113.5 LPM
36 FT 11 M
0.375 HP 0.279 KW
Electrical/Air: 1Ph 115/230V 60Hz & 115/230V 50Hz or 3Ph 230/460V 60Hz & 230/460V 50Hz, or 3Ph 575V 60Hz
Inlet: 1″FPT
Outlet: 3/4″MPT
  • Wet End: Polypropylene (Impeller, Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)
  • Additional Motor Options: Available in 1HP Explosion Proof and Washdown
  • Max Internal Pressure: 50 PSI / 3.4 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.

Pump Curves & General Installation Sheets

March TE-6 60Hz Pump Curve

March TE-6 50Hz Pump Curve

March TE-6 Pump Manual

March Pump General Installation Guide

March Safety Instructions and Preventive Maintenance Guide

Part Numbers

P/N Pump Description Modified With
0153-0095-0100 TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket Standard
0153-0095-0200 TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket Standard
0153-0095-0300 TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket Standard
The below are modified TE-6P-MD’s with Metal Motor Brackets
0153-0095-0112 TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket Teflon O-Ring
0153-0095-0212 TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket Teflon O-Ring
0153-0095-0312 TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket Teflon O-Ring
0153-0095-0130 TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket Carbon Bushing
0153-0095-0230 TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket Carbon Bushing
0153-0095-0330 TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket Carbon Bushing
0153-0095-0132 TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket Mica Teflon Bushing
0153-0095-0232 TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket Mica Teflon Bushing
0153-0095-0332 TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket Mica Teflon Bushing
P/N Pump Description Modified With
0153-0116-0100 TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket Standard
0153-0117-0100 TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket Standard
The below are modified TE-6P-MD’s with Plastic Motor Brackets
0153-0116-0112 TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket Teflon O-Ring
0153-0117-0212 TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket Teflon O-Ring
0153-0116-0130 TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket Carbon Bushing
0153-0117-0230 TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket Carbon Bushing
0153-0116-0132 TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket Mica Teflon Bushing
0153-0117-0232 TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket Mica Teflon Bushing

Parts Breakdown

Item Part Number Qty Description
0153-0095-0100 1 TE-6P-MD, 1 Phase, Complete Standard Pump
0153-0095-0200 1 TE-6P-MD, 3 Phase, Complete Standard Pump
1 0153-0064-1000 6 1/4″-20 x 1-3/4″ Long Screw (Stainless)
2 0155-0021-1000 6 1/4″ ID x 1/2″ OD Washer (Stainless)
3 0153-0052-1000 1 Front Housing with 1” FPT Inlet & 3/4″ MPT Outlet (Polypropylene)
4 0153-0015-1000 1 3/32″ CS x 4-7/16” ID “O” Ring (Viton)
5 0155-0009-1000 1 Thrust Washer (Ceramic)
6 0153-0007-1000 1 Shaft (Ceramic)
7 0153-0003-0400 1 Impeller with Ryton/Teflon/Carbon Bushing (Polypropylene)
8 0153-0072-0100 1 Rear Housing with Ceramic Thrust Washer (Polypropylene)
9 0153-0035-0100 1 Drive Magnet
10 0153-0093-0010 1 Motor Bracket (Aluminum)
11 0155-0017-1000 4 3/8-16 x 3/4″ Long Screw (Stainless)
12 0155-0019-1000 4 3/8″ ID x 5/8″ OD Washer (Stainless)
13 0153-0019-1000 1 Motor, TEFC, 1 Phase, 115/230V, 50/60 Hz
14 0153-0020-1000 1 Motor, TEFC, 3 Phase, 230/460V 50/60 Hz
WEK 0153-0096-0100 1 Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7, 8)
PLM 0153-0099-0100 1 Pump Less Motor (Items: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12)

 Options

Item Part Number Qty Description
4 0153-0025-1000 1 3/32″ CS x 4-7/16” ID “O” Ring (EPDM)
4 0153-0107-1000 1 3/32″ CS x 4-7/16″ ID “O” Ring (Teflon)
5 0155-0084-1000 1 Thrust Washer (Hastelloy “C”)
5 0155-0149-1000 1 Thrust Washer (Silicon Carbide)
5 0155-0233-1000 1 Thrust Washer (Zirconium)
6 0153-0046-1000 1 Shaft (316 Stainless Steel)
6 0153-0073-1000 1 Shaft, 3 Flats (Ceramic)
7 0153-0003-0500 1 Impeller with Carbon Bushing (Polypropylene)
7 0153-0003-0900 1 Impeller with Mica Teflon Bushing (Polypropylene)
10 0153-0001-0100 1 Motor Bracket (Ryton)
10 0153-0093-0010 1 Motor Bracket (Noryl)
0155-0059-1000 1 Motor, Explosion Proof, 1 Phase (Contact March For Additional Specs)
0155-0060-1000 1 Motor, Explosion Proof, 3 Phase (Contact March For Additional Specs)
1 Motor, Washdown, 1 Phase (Contact March For Additional Specs)
1 Motor, Washdown, 3 Phase (Contact March for Additional Specs)
0750-1011-1000 1 Stainless Steel Tag w/Customer’s Desired Information (Not Shown)
Flanges (Not Shown)

Dimensional Drawings

march-te-6p-md-3ph-drawing-0153-0095-0200-d1-r

march-te-6p-md-1ph-0153-0095-0100-drawing-d1-d

 

Motor Information

0153-0019-1000 Motor 
Conduit Box, TEFC, IP43
60Hz: 1Ph 0.5HP / 0.37kW, 115/230V, 7.4/3.7 AMPS, 3450RPM (Usable at 208V)
50Hz: 1Ph 0.375HP/ 0.28kW, 115/230V, 8.4/4.2 AMPS, 2850RPM

0153-0020-1000 Motor
Conduit Box, TEFC. IP43, VFD Capable
60Hz:  1Ph 0.5HP / 0.37kW, 230/460V, 1.5/0.75 AMPS, 3450RPM (Usable at 208V and 415V)
50Hz:  1Ph 0.5HP / 0.37kW, 230/460V, 1.7/0.85 AMPS, 2850RPM (Usable at 415V)

Perfect for Applications Including

Applications for the TE-6P-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, silver recovery systems, and marine air conditioners.

Great for Chemicals Including

The TE-6P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-6P-MD may have been modified to handle these chemicals.  This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.  Please contact March Pump to review your application before using the TE-6P-MD. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-6P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread.  There are two standard motors.  The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 115/230V 0.5 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 230/460V 0.5 horsepower totally enclosed fan cooled motor.  There are performance differences between the hert options.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-6P-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-6P-MD is suitable for your application, please contact March Pump.

Unit 60Hz
System US Metric
Max Flow 38 GPM 144 LPM
Max Head 49 FT 15 M
Power 0.5 HP 0.372 KW
50Hz
US Metric
30 GPM 113.5 LPM
36 FT 11 M
0.375 HP 0.279 KW
Electrical/Air: 1Ph 115/230V 60Hz & 115/230V 50Hz or 3Ph 230/460V 60Hz & 230/460V 50Hz, or 3Ph 575V 60Hz
Inlet: 1″FPT
Outlet: 3/4″MPT
  • Wet End: Polypropylene (Impeller, Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)
  • Additional Motor Options: Available in 1HP Explosion Proof and Washdown
  • Max Internal Pressure: 50 PSI / 3.4 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.