TE-10K-MD Magnetic Drive Pump

March Pump’s industrial TE-10K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 200 gallons per minute at 70 feet, and its maximum head is 160 Feet (70PSI).

Category:
Unit 60Hz
System US Metric
Max Flow 200 GPM 757 LPM
Max Head 160 FT 48.7 M
Power 10 HP 7.46 KW
50Hz
US Metric
172 GPM 654 LPM
112 FT 34.1 M
10 HP 7.46 KW
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3″MPT
Outlet: 2″MPT
  • Wet End: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
  • Additional Motor Options: Available in 10HP Explosion Proof, 575V, and Washdown
  • Max Internal Pressure: 75 PSI / 5.2 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.

 Pump Curves & General Installation Sheets

PDF LogoMarch Safety Instructions and Preventive Maintenance Guide

PDF LogoMarch Pump General Installation Guide

PDF LogoMarch TE-10 Series Pump Manual

PDF LogoMarch-TE-10-MD Curve 50Hz

PDF LogoMarch TE-10-MD Curve 60Hz

Part Numbers

P/N Pump Description Modified With
0161-0016-0100 TE-10K-MD 3Ph 10HP Standard
0161-0016-0200 TE-10K-MD 3Ph 10HP Explosion Proof Standard
0161-0016-0300 TE-10K-MD 3Ph 575V 10HP Standard
The below are modified TE-10K-MD’s
0151-0016-0112 TE-10K-MD 3Ph 10HP Teflon O-Ring
0161-0016-0212 TE-10K-MD 3Ph 10HP Explosion Proof Teflon O-Ring
0161-0016-0312 TE-10K-MD 3Ph 575V 10HP Teflon O-Ring
0151-0016-0113 TE-10K-MD 3Ph 10HP EPDM O-Ring
0161-0016-0213 TE-10K-MD 3Ph 10HP Explosion Proof EPDM O-Ring
0161-0016-0313 TE-10K-MD 3Ph 575V 10HP EPDM O-Ring
0161-0016-0130 TE-10K-MD 3Ph 10HP Mica Teflon Bushing
0161-0016-0230 TE-10K-MD 3Ph 10HP Explosion Proof Mica Teflon Bushing
0161-0016-0330 TE-10K-MD 3Ph 575V 10HP Mica Teflon Bushing
0161-0016-0252 TE-10K-MD 3Ph 10HP Explosion Proof Mica Teflon Bushing and Teflon O-Ring
0161-0016-0352 TE-10K-MD 3Ph 575V 10HP Mica Teflon Bushing and Teflon O-Ring
0161-0016-0152 TE-10K-MD 3Ph 10HP Mica Teflon Bushing and Teflon O-Ring

Parts Breakdown

Te-10-Md-Parts-Breakdown

Item Part Number Qty Description
0161-0016-0100 1 TE-10K-MD, 3 Phase, Complete Standard Pump
1 0160-0029-1000 9 5/16”-18 x 1-3/4” Long Screw (Stainless)
2 0160-0030-1000 9 5/16” ID x 5/8” OD Washer (Stainless)
3 0161-0008-1000 1 Pump Housing with 3″ MPT Inlet & 2″ MPT Outlet (Kynar)
4 0161-0043-1000 1 9.750” ID x 10” OD Gasket (Viton)
5 0161-0001-1000 2 Front & Rear Thrust Washer (Ceramic)
6 0161-0002-1000 1 Shaft (Ceramic)
7 0161-0005-0400 1 Impeller w/Carbon Bushings (Glass Filled Kynar)
8 0161-0009-1000 1 Rear Housing (Kynar)
9 0161-0031-0100 1 Drive Magnet
10 0161-0007-0010 1 Motor Bracket (Metal)
11 0160-0031-1000 4 1/2″-13 x 1″ Long Screw (Stainless)
12 0161-0012-1000 1 Motor, TEFC, 3 Phase, 230/460 V, 50/60 Hz, 10HP
WEK 0161-0035-0100 1 Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7, 8)
PLM 0161-0036-0100 1 Pump Less Motor (Items: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11)

Options

PDF Logo

Item Part Number Qty Description
4 0161-0047-1000 1 9.750” ID x 10” OD Gasket (EPDM)
4 0161-0059-1000 1 9.750” ID x 10” OD Gasket (Teflon Encapsulated Viton)
5 0161-0034-1000 2 Front & Rear Thrust Washer (Silicon Carbide)
6 0161-0039-1000 1 Shaft, 3 Flats (Ceramic)
6 0161-0046-1000 1 Shaft (Silicon Carbide)
7 0161-0005-0600 1 Impeller with Mica Teflon Bushings (Kynar)
7 0161-0005-0700 1 Impeller w/Silicon Carbide Bushings (Glass Filled Kynar)
0750-1011-1000 1 Stainless Steel Tag w/Customer’s Desired Information (Not Shown)

Dimensional Drawings

PDF LogoDimensional Drawing TE-10K-MD

 Motor Information

0161-0012-1000 Motor
Conduit Box, TEFC, IP55, VFD Capable
60Hz: 3Ph 10HP/ 7.4kW, 230/460V, 23.2/11.6 AMPS, 3450 RPM (Usable at 208V)
50Hz: 3Ph 10HP/ 7.4kW, 380V, 14.1 AMPS, 2850 RPM (Usable at 190/220V)

Perfect for Applications Including

Applications for the TE-10K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.

Great for Chemicals Including

The TE-10K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-10K-MD may have been modified to handle these chemicals.  This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.  Please contact March Pump to review your application before using the TE-10K-MD. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-10K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 200 gallons per minute at 70 feet, and its maximum head is 160 Feet (70PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar (PVDF), glass filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 3 inch male pipe thread, and the outlet is 2 inch male pipe thread. The standard motor is a 3 Phase 10 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-10K-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-10K-MD is suitable for your application, please contact March Pump.

Unit 60Hz
System US Metric
Max Flow 200 GPM 757 LPM
Max Head 160 FT 48.7 M
Power 10 HP 7.46 KW

 

50Hz
US Metric
172 GPM 654 LPM
112 FT 34.1 M
10 HP 7.46 KW
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3″MPT
Outlet: 2″MPT
  • Wet End: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
  • Additional Motor Options: Available in 10HP Explosion Proof, 575V, and Washdown
  • Max Internal Pressure: 75 PSI / 5.2 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.