Categories: Uncategorized

4 Issues That Can Mean A Pump Change

1. Damage From Cavitation

  • When bubbles form and explode inside pumps, the change in pressure can cause physical damage to the internal components, including the impeller. The damage can be irreparable or too expensive to fix. The only option is to replace the pump.

2. Damaged Shaft

  • A misaligned or improperly installed belt or chain drive can exert abnormal pressure on a pump’s shaft. Depending on the load and pressure, this can completely break a shaft or result in cracks or fractures. Usually, the only solution is to replace the pump.duces the extraction of ground water

3. Rust Damage

  • Lack of regular maintenance or infrequent use can cause a pump to develop rust. If not removed soon enough, the rust can gradually eat into the metal parts of a pump. This can greatly reduce a pump’s efficiency. If the rusting is severe, replacing the pump is the only option.

4. Damage From Deposite Build-Up

  • If a pump is not regularly cleaned, the contaminants in the fluid flowing through the pump can build up over time. Examples include, salt deposits and sludge. Excessive build-up of deposits can be extremely difficult to remove and can even damage the internals of a pump physically. In extreme cases, pump replacement becomes unavoidable.

Recent Posts

  • Blog

Data-Driven Maintenance – Why Pumps and Mixers are your Best Bet for Predictive Analytics

Data-Driven Maintenance - Why Pumps and Mixers are your Best Bet for Predictive Analytics When…

1 week ago
  • Blog

How Inline Static Mixers Are Transforming Chemical Dosing Accuracy

Precise chemical dosing is critical in water treatment, industrial manufacturing, and chemical processing. However, achieving…

1 week ago
  • Blog

When and Why Commercial Facilities Need a Pressure Booster Pump

Low water pressure in commercial buildings isn't just a nuisance—it can disrupt essential operations. In…

1 week ago
  • Blog

What Makes Grundfos Pumps a Top Choice for Canadian Process Industries?

Meeting fluid handling requirements in Canadian process industries isn’t just about durability. It’s about efficiency,…

2 weeks ago
  • Blog

Circular Economy for Plant Managers

Most manufacturers still operate with a "take-make-dispose" mindset: extract resources, process them once, and then…

2 weeks ago
  • Blog

People Power is the Key to Reliability in the Age of Smart Equipment

Even with pumps that can diagnose themselves and mixers that auto-adjust, the biggest factor in…

1 month ago