Six typical installations are shown below. Our engineering staff can assist with product selection and application.
The injector is installed around a point of restriction such as a regulator valve or a gate/ball valve to create a differential pressure across the injector. This allows the injector to produce a vacuum and draw in material.
(See Fig.1 and Fig.2)
The injector is installed on the mainline and the pressure reducing device is on the bypass. Chemical injection can be turned on when the control valve is closed. When the valve is open, injection stops due to reduced pressure differential. (See Fig.3)
The injector is installed on a bypass with a booster pump. When mainline pressure cannot be reduced, a small booster pump can be used to create sufficient differential pressure to operate the injector. (See Fig.4)
The injector is installed in the mainline. The injector must see a sufficient differential to operate. In other words, the inlet pressure must be sufficiently greater than the outlet pressure. (See Fig.5)
Look for The Mazzei® Design . . . Because It's What's Inside That Matters!
Search This Site
(Search by Product Type i.e. Level or Brand Name i.e. Pulsafeeder)
Pumps And Related Liquid Handling Equipment
Vissers Sales Corp. is a Canadian distributor and representative for liquid handling equipment related to the Chemical/Industrial market. We specialize in all types of pumps, mixers, valves, process controls, level and flow controls.
Vissers Sales Corp. provides an indepth Directory of Industrial Pumps featuring Centrifugal Pumps, Positive Displacement Pumps, Drum Pumps, Metering Pumps, Tote Pumps from the world's leading manufacturers available at Vissers Sales Corp.. We offer a wide variety of products to meet your unique needs.