Thermoplastic Close Coupled Horizontal Centrifugal Pumps - Vanton CHEM-GARD CGC®

CHEM-GARD® CGC Thermoplastic Close Coupled Centrifugal Pumps

Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGCWhen space is critical, cost savings important, and dependable transfer of aggressive or ultrapure fluids a must, the Vanton series of close-coupled, end suction thermoplastic centrifugal pumps is ideal. Its small footprint reduces space requirements by as much as 20%, initial cost is appreciably lower than conventional foot mounted centrifugal pumps, and its availability in solid molded homogeneous polypropylene and polyvinylidene fluoride assures reliable fluid handling without corrosion or product contamination. These quality engineered metal armored, solid (not lined) nonmetallic pumps incorporate the superior design and manufacturing innovations of the Vanton CHEM-GARD® line in a smaller, more compact envelope especially significant for OEM equipment.

Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGCVanton CGC pumps are available in your choice of tangential or centerline discharge that allows removal for maintenance without disturbing existing piping. Both offer easy seal access configuration. Their innovative construction includes a pump shaft assembly completely independent of the motor shaft, minimizing maintenance and extending motor service life. The pumps are designed to accommodate standard C-face motors and commercial mechanical seals. Where product contamination can not be tolerated, all fluid contact components can be furnished in virgin natural and unpigmented thermoplastics to assure the integrity of high purity water, chemicals, pharmaceuticals and semiconductor fluids.




  • Flows to 500 gpm

  • Heads to 220 feet

  • Temperatures to 275�F

Click Here for Engineering Specifications


  1. Pump casing and cover molded from virgin, homogeneous thermoplastic.

  2. Dynamically balanced, molded homogeneous thermoplastic semi-open or closed vane impeller with imbedded stainless steel insert. Key driven to assure positive drive in either direction.

  3. Alloy steel, large diameter shaft with wet and completely isolated from fluid contact by a thick sectioned thermoplastic sleeve.

  4. Pump accommodates standard single and double mechanical seals without modification. Seals are reverse mounted with nonmetallic seal component inboard to avoid any metal-to-fluid contact, making it unnecessary to use expensive high alloy or exotic metals.

  5. Shaft bearing is lubricated by direct product flush and positioned to minimize shaft deflection and extend service life.

  6. Metal armor totally encloses thermoplastic casing and flanges to provide nozzle loadings comparable to those of metal pumps.

Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGC

Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGC

Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGC


  • Thermoplastic, Close Coupled, Horizontal Centrifugal Pumps, Vanton, CHEM-GARD CGCDimensions and specifications subject to change and may vary slightly with motor manufacturer selected.

  • 50 Hertz performance curves and metric dimensions are available on request.

  • For higher horsepower and operating speeds consult factory.

  • Catalog sheets available on other Vanton centrifugal pump models including self-priming designs, vortex heads, magnetic drive and foot mounted pumps.


  • No corrosion or rusting. Metals corrode, plastics don't.

  • No interbatch product contamination. Fiberglass composites wick and absorb fluids by capillary action. Solid homogeneous thermoplastics don't.

  • No danger of metallic contamination.

  • No problems with galling. Easier maintenance.

  • Superior resistance to abrasion than metals or fiberglass composites.

  • Greater chemical resistance over the full pH range than stainless steel or fiberglass composites.

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Pulsafeeder)

Pumps And Related Liquid Handling Equipment

About Us

Vissers Sales Corp. is a Canadian distributor and representative for liquid handling equipment related to the Chemical/Industrial market. We specialize in all types of pumps, mixers, valves, process controls, level and flow controls.


Our Products

Vissers Sales Corp. has a wide variety of liquid handling products for the Chemical and Industrial industries. Industrial Pumps, Flow Control Systems, Instrumentation Products, Industrial Mixers, Metering Accessories, Industrial Systems, Filtration Products and Tank Container Systems from the world's leading manufacturers

Website Content

Vissers Sales Corp. provides an indepth Directory of Industrial Pumps featuring Centrifugal Pumps, Positive Displacement Pumps, Drum Pumps, Metering Pumps, Tote Pumps from the world's leading manufacturers available at Vissers Sales Corp.. We offer a wide variety of products to meet your unique needs.

Get in Touch